Archive

Archives

High Durability (HD) Cut Wire

October 11, 2022

Introducing the newest technology to reduce shot-peening media consumption and dust generation.

High Durability (HD) Cut Wire Shot Features: Heat-treated and tempered to reduce abrasive consumption by 40% vs. standard cut wire shot Reduce costs of dust generation, maintenance, wear part replacement, dust disposal and freight North American based manufacture and raw material sourcing Meets specifications J0441, AMS-2431-3, AMS-2431-8 and VDFI-8001 Available in shapes: As-cut (Z), CCW (G1), DCCW (G2) and SCCW (G3)… Read more >

Rapid Blast™

March 22, 2022
Performance driven abrasives for the forging and foundry industry

Introducing the latest technology to improve shot-blasting efficiency and cut blast-cleaning costs.

RAPID BLAST™ FEATURES: Improved surface finish and part cleanliness Designed to reduce abrasive consumption and related costs, such as disposal, by as much as 40% Increased blast-cleaning efficiency, reducing cycle times by as much as 30% Savings in energy, labor, maintenance, wear parts and freight Reduced consumption and waste, benefiting the environment

If today’s prices of steel shot have you looking for alternatives, Rapid Blast™ may be the solution.… Read more >

OXGRIT

September 22, 2021

OXGRIT is an engineered blasting abrasive products designed to outperform existing abrasives.

FEATURES:

Derived from Duramax crude products Non-ferrous products that are higher density than natural flags, aluminum oxide and garnet products Heavier than all other common abrasives with the exception of steel abrasives Longer life than any other abrasive with the exception of cast steel abrasives, grit & shot Magnetic and can be used with magnetic reclamation equipment commonly used in industry Fast cleaning & cutting products, ~30% higher production rate versus garnet media Low-dusting and generate less dust than other abrasives in the industry.… Read more >

Aluminum Cut Wire

March 26, 2021
APPLICATIONS: Deburring Blasting Blast Cleaning MATERIAL: EN AW-6060 according to DIN EN 573-3 Other materials available upon request MANUFACTURING STANDARDS/APPLICABLE SPECIFICATIONS: Subject to prior agreement SIZES: 0,5 mm 0,6 mm 0,7 mm 0,8 mm 0,9 mm 1,0 mm 1,1 mm 1,2 mm 1,4 mm 1,6 mm Other sizes on request GRAIN SHAPE: Cylindrical MATERIAL HARDNESS: Approximately 100 HV0,5/1 – 150 HV0,5/1 PACKAGING: PE plastic bags on approx.… Read more >

Gritinox Stainless

May 14, 2020

With its hard edges and rustproof properties, Gritinox is the low cost alternative to mineral blasting media. The obtained surface structure provides the optimal basis for subsequent coating methods.

Steel Angular Gritinox

APPLICATION FIELDS:

Blast cleaning, deburring, sweep blasting of hot dip galvanised surfaces, surface treatment prior to coating, surface finishing, fine and structural blasting, water jet cutting

APPLICATIONS: Bodywork All kinds of aluminium castings Aluminium forgings Zinc pressure die castings Stainless steel castings and forgings Apparatus and welded structures of stainless steel, nonferrous metals Concrete and natural stones AVERAGE CHEMICAL ANALYSIS:

C: 1,95-2,2%, Cr: 27,0-30,0%, Ni: 0,0-0,5%, Si: 1,8-2,2%, Mn: 0,7-1,2%

HARDNESS:

≈ 710 HV

APPARENT DENSITY:

≈ 4.0-4.2 kg/dm³

SIEVE ANALYSIS:

PACKAGING:

500 kg / 1000 kg in 25 kg PE bags on pallets… Read more >

Low-Nickel Stainless Shot (Sperinox-CR)

May 14, 2020

Spherinox-CR is an effective substitute for conventional CrNi blasting media. This product presents the optimal price-performance ratio. It is used specifically in the various stages of aluminium processing.

APPLICATION FIELDS:

Blast cleaning, deburring, surface improvement, surface finishing

APPLICATIONS: All kinds of aluminum castings Aluminum forgings Zinc pressure die castings Apparatus and welded structures of stainless steel Nonferrous metals Concrete and natural stones AVERAGE CHEMICAL ANALYSIS:

C: 0,2%, Cr: 15,9%, Ni: 0,95%, Si: 2,2%, Mn: 1,2%

HARDNESS:

Delivered state ≈ 290 HV, Ready mixture ≈ 520 HV

BULK DENSITY:

≈ 3.8 – 4.6 kg/dm³

SIEVE ANALYSIS:

PACKAGING:

500 kg / 1000 kg in 25 kg PE bags on EUR-pallets in cardboard box and shrinkwrap… Read more >

High-Nickel Stainless Shot (Sperinox-AC)

May 14, 2020
APPLICATION FIELDS:

Blast cleaning, deburring, surface improvement, surface finishing

APPLICATIONS: All kinds of aluminum castings Aluminum forgings Stainless steel castings and forgings Zinc pressure die castings Apparatus and welded structures of stainless steel Nonferrous metals Concrete and natural stones AVERAGE CHEMICAL ANALYSIS:

C: 0,05-0,2%, Cr: 16,0-20,0% Ni: 7,0-9,0%, Si: 1,8-2,2% Mn: 0,7-1,2%

HARDNESS:

Delivered state ≈ 240 HV, Ready mixture ≈ 500 HV

BULK Density:

≈ 3.8 – 4.6 kg/dm³

SIEVE ANALYSIS:

PACKAGING:

500 kg / 1000 kg in 25 kg PE bags on EUR-pallets in cardboard box and shrinkwrap… Read more >

Plastic De-flashing Media

May 14, 2020
APPLICATION FIELDS:

Blast cleaning, deburring of machined die cast parts, deflashing of thermoset appearance parts

APPLICATIONS: Duroplast parts Rubber parts Silicone parts Elastomer parts Zinc pressure die castings PROPERTIES: Long service lives (high resistance) High ductility Free of blasting residue No color transfer Uniform grain shape and size MATERIAL: Polyamide PA 6 Other materials and colors on request SIZES: 0.75 mm x 0.75 mm 1.00 mm x 1.00 mm 1.50 mm x 1.50 mm Other sizes on request GRAIN SHAPE: Cubic Cylindrical SPECIFIC WEIGHT: Approx 1.12-1.14 kg/l BULK DENSITY: Approx 0.68 kg/l PACKAGING: 20 kg PE bag Other packaging on request… Read more >

Zinc Cut Wire

May 14, 2020

As cut, Conditioned, Double Conditioned

APPLICATION FIELDS: Deburring APPLICATIONS: Zinc pressure die castings MATERIAL: Zn 99.99% conforming to ISO 14919 Other materials on request MANUFACTURING STANDARDS/APPLICABLE SPECIFICATIONS: Following consultation SIZES: 0,6 mm 0,7 mm 0,9 mm 1,0 mm 1,1 mm 1,2 mm 1,4 mm 1,6 mm 1,8 mm Other sizes on request GRAIN SHAPE: Cylindrical Rounded HARDNESS CLASS: Approx 30-45 HV0.1 PACKAGING: 25 kg PE bag oh EUR-pallet (max 1000 kg) Big bags max 500/1000 kg on expendable pallet 200 litre barrels max 800/1000 kg Other packaging on request… Read more >

Zinc Alloy Cut Wire

May 14, 2020

As cut, Conditioned, Double Conditioned

APPLICATION FIELDS

Blast cleaning, deburring, surface improvement, surface finishing

APPLICATIONS Aluminum castings Aluminum forgings Magnesium castings MATERIAL Conforming to DIN EN 573-3 Other materials on request MANUFACTURING STANDARDS / APPLICABLE SPECIFICATIONS Following consultation SIZES 0,6 mm 0,8 mm 1,0 mm 1,2 mm 1,6 mm Other sizes on request GRAIN SHAPE

 

HARDNESS CLASS Approx 100-150 HV0.1 PACKING UNITS 25 kg (55 lbs) PE-bags, 500 kg (1100 lbs) on pallet, surrounded by a cardboard box and shrink-wrapped… Read more >